Drive Pinion Assembly
Preload adjustment of thrust bearing
Starting torque:
0.3 - 0.8 Nm (0.03 - 0.08 kgf-m, 0.2 - 0.6 ft-lb)
ADJUSTING WASHER THICKNESS SPECIFICATION
| Adjusting washer No. 1 | |
|---|---|
| Part No. | Thickness mm (in) |
| 32008260 | 3.925 (0.1545) |
| 32008261 | 3.950 (0.1555) |
| 32008262 | 3.975 (0.1565) |
| 32008263 | 4.000 (0.1575) |
| 32008264 | 4.025 (0.1585) |
| 32008265 | 4.050 (0.1594) |
| 32008266 | 4.075 (0.1604) |
ADJUSTING WASHER THICKNESS SPECIFICATION
| Adjusting washer No. 2 | |
|---|---|
| Part No. | Thickness mm (in) |
| 32008268 | 3.850 (0.1516) |
| 32008263 | 4.000 (0.1575) |
| 32008267 | 4.150 (0.1634) |