Ignition Key Lock: Inspection
Remove the instrument panel lower cover.
Remove the lower column cover.
Unfasten the hold-down clip which secures harness and disconnect the connector of ignition switch from body harness.
Turn the ignition key plate to each position and check the continuity between terminals of ignition connector.
SWITCH POSITION TERMINALS REFERENCE
| Switch position | Terminal No. | Standard |
|---|---|---|
| LOCK | - | - |
| ACC | No. 1 and No. 2 | Less than 1 O |
| ON | No. 1 and No. 2 No. 1 and No. 4 No. 2 and No. 4 |
Less than 1 O |
| ST | No. 1 and No. 3 No. 1 and No. 4 No. 3 and No. 4 |
Less than 1 O |
If NG, replace the ignition switch.