Technical Data: Specifications
TECHNICAL DATA SPECIFICATIONS
| Cooling system | Electric fan + Forced engine coolant circulation system | ||
| Total engine coolant capacity | liters (US qt, Imp qt) | AT model: Approx. 6.9 (7.29, 6.07) MT model BR Approx. 7.0 (7.4, 6.2) |
|
| Water pump | Type | Centrifugal impeller type | |
| Discharge performance I | Discharge | 20 liters (5.3 US gal, 4.4 Imp gal)/min. | |
| Pump speed - Discharge pressure | 760 RPM - 2.9 kPa (0.3 mAq) | ||
| Engine coolant temperature | 85°C (185°F) | ||
| Discharge performance II | Discharge | 100 liters (26.4 US gal, 22.0 Imp gal)/min. | |
| Pump speed - Discharge pressure | 3,000 RPM - 49.0 kPa (5.0 mAq) | ||
| Engine coolant temperature | 85°C (185°F) | ||
| Discharge performance III | Discharge | 200 liters (52.8 US gal, 44.0 Imp gal)/min. | |
| Pump speed - Discharge pressure | 6,000 RPM - 225.4 kPa (23.0 mAq) | ||
| Engine coolant temperature | 85°C (185°F) | ||
| Impeller diameter | 76 mm (2.99 in) | ||
| Number of impeller vanes | 8 | ||
| Pump pulley diameter | 60 mm (2.36 in) | ||
| Clearance between impeller and case | Standard | 0.5 - 0.7 mm (0.020 - 0.028 in) | |
| "Thrust" runout of impeller end | 0.5 mm (0.020 in) | ||
| Thermostat | Type | Wax pellet type | |
| Starts to open | 76 - 80°C (169 - 176°F) | ||
| Fully opened | 91°C (196°F) | ||
| Valve lift | 9.0 mm (0.354 in) or more | ||
| Valve bore | 35 mm (1.38 in) | ||
| Radiator fan | Motor | Main fan | 70 W |
| Sub fan | 70 W | ||
| Fan diameter x Blade | 320 mm (12.60 in) x 5 (main fan) 320 mm (12.60 in) x 7 (sub fan) |
||
| Radiator | Type | Down flow, pressure type | |
| Core dimensions | Width x Height x Thickness | 691.5 x 340 x 16 mm (27.22 x 13.39 x 0.63 in) |
|
| Pressure range in which cap valve is open | Above: 108+/-15 kPa (1.1+/-0.15 kg/cm2 , 16+/-2 psi) Below: - 1.0 to - 4.9 kPa (- 0.01 to - 0.05 kg/cm2 , - 0.1 to - 0.7 psi) |
||
| Fins | Corrugated fin type | ||
| Reservoir tank | Capacity | 0.5 liters (0.5 US qt, 0.4 Imp qt) | |