Adjusting Parts

ADJUSTING PARTS SPECIFICATION

Front and rear bearing preload at companion flange bolt hole N (kgf, lb)	18.1 - 38.8 (1.8 - 4.0, 4.1 - 8.7)
Preload adjusting spacer	Part No.	Length mm (in)
	32007045	56.2 (2.213)
	32007046	56.4 (2.220)
	32007047	56.6 (2.228)
	32007048	56.8 (2.236)
	32007049	57.0 (2.244)
	32007050	57.2 (2.252)
Preload adjusting washer	Part No.	Length mm (in)
	32007051	2.59 (0.1020)
	32007052	2.57 (0.1012)
	32007053	2.55 (0.1004)
	32007054	2.53 (0.0996)
	32007055	2.51 (0.0988)
	32007056	2.49 (0.0980)
	32007057	2.47 (0.0972)
	32007058	2.45 (0.0965)
	32007059	2.43 (0.0957)
	32007060	2.41 (0.0949)
	32007062	2.39 (0.0941)
	32007063	2.37 (0.0933)
	32007064	2.35 (0.0925)
	32007065	2.33 (0.0917)
	32007066	2.31 (0.0909)
Pinion height adjusting washer	Part No.	Thickness mm (in)
	32007021	3.09 (0.1217)
	32007022	3.12 (0.1228)
	32007023	3.15 (0.1240)
	32007024	3.18 (0.1252)
	32007026	3.21 (0.1264)
	32007028	3.24 (0.1276)
	32007029	3.27 (0.1287)
	32007030	3.30 (0.1299)
	32007031	3.33 (0.1311)
	32007033	3.36 (0.1323)
	32007035	3.39 (0.1335)
	32007036	3.42 (0.1346)
	32007037	3.45 (0.1358)
	32007038	3.48 (0.1370)
	32007039	3.51 (0.1382)
	32007040	3.54 (0.1394)
	32007041	3.57 (0.1406)
	32007042	3.60 (0.1417)
	32007043	3.63 (0.1429)
	32007044	3.66 (0.1441)
Side gear backlash mm (in)	0.1 - 0.2 (0.0039 - 0.0079)
Side gear thrust washer (Model without LSD)	Part No.	Thickness mm (in)
	32007010	0.75 - 0.80 (0.0295 - 0.0315)
	32007011	0.80 - 0.85 (0.0315 - 0.0335)
	32007012	0.85 - 0.90 (0.0335 - 0.0354)
Side bearing standard width mm (in)	-	20.00 (0.7874)
Side bearing retainer shim	Part No.	Thickness mm (in)
	32007015	0.20 (0.0079)
	32007016	0.25 (0.0098)
	32007017	0.30 (0.0118)
	32007018	0.40 (0.0157)
	32007019	0.50 (0.0197)
Hypoid driven gear to drive pinion backlash mm (in)	Limit	0.10 - 0.20 (0.0039 - 0.0079)
Hypoid driven gear runout on its back surface mm (in)	Limit	0.05 (0.0020)