LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2005 >> 9-2X Linear, 251, Automatic >> Repair and Diagnosis >> Brakes >> Traction Control >> Abs - Service Information >> Adjustment/Replacement/Inspection >> ABS Sequence Control >> Specification >> Conditions For Completion Of ABS Sequence Control

Conditions For Completion Of ABS Sequence Control

When the following conditions develop, the ABS sequence control stops and ABS operation is returned to the normal control mode.

When the speed of at least one wheel reaches 10 km/h (6 MPH).

When the brake pedal is released during sequence control and the stop light switch is set to off.

After completion of the sequence control.

When malfunction is detected.

scientia non olet · About LEMON Manuals