LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2004 >> 9-5 Linear, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Stabilizer System, Esp >> Adjustment - Replacement >> Yaw rate sensor >> To remove

To remove

  1. Remove the center console, see TO REMOVE .
    Fig 1: Illustration For Step 1-3
    G03745640Courtesy of SAAB-SCANIA OF AMERICA, INC.
  2. Manual gearbox:  Remove the gear lever housing, see TO REMOVE .

    Automatic transmission:  Remove the selector lever housing, see TO REMOVE .

  3. Remove the gyro sensor. Use a large screwdriver to pry aside the air duct slightly to access the left-hand screw.
  4. Unplug the connector from the gyro sensor.
    NOTE: The connector has a locking device that must be released.
scientia non olet · About LEMON Manuals