Main task: Notes
WARNING: This page is about a different car, the 2003 Saab 9-3. However, it is still accessible from the selected car via links, so may be relevant.
The main tasks of the DDM are:
- Read the status of the window lift buttons.
- Control and supply power for the driver's door window lift (with optional pinch protection function)
- Send the status for other window lift buttons on the bus.
- Read the bootlid button status and send the value on the bus.
- Read the status of the door mirror buttons.
- Control and supply power for the driver door mirror motors (optional memory function and electrically-operated retraction) and control the corresponding function for the front passenger door via the bus.
- Supply power to driver's door mirror heating.
- Read the central lock button status and send the value on the bus.
- Supply power to central locking system in driver's door with or without TSL, read the central locking system and TSL status and send the value on the bus.
- The control module also reads the door switch status with an individual lead but does not use the value. The connection is intended for future development.
- Supply power to door button lighting.
- Supply power to the courtesy lighting lamp mounted in the lower edge of the door.