LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2004 >> 9-5 Linear, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (Control Module (Late; 9440)) >> Fault Diagnosis, General >> Procedure after changing the control module >> Add >> Notes

Procedure after changing the control module: Add: Notes

WARNING: This page is about a different car, the 2003 Saab 9-3. However, it is still accessible from the selected car via links, so may be relevant.

Once the control module has been fitted and in certain cases SPS programming has been carried out, Tech 2 must be used to marry the control unit to the car. Go to the "All" menu and select the control module under "ADD/REMOVE". Then select "Add" and follow the instructions. The ignition key must be in ON position. TIS 2000 may be required.

scientia non olet · About LEMON Manuals