LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2004 >> 9-5 Linear, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (Control Module (Late; 9440)) >> Adjustment-Replacement >> DSM >> Removing

Section 42 (Control Module (Late; 9440)): Adjustment-Replacement: DSM: Removing

WARNING: This page is about a different car, the 2003 Saab 9-3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front seat.
  2. Remove the front seat cowl.
    Fig 1: Illustration For Step 2
    G03617155Courtesy of SAAB-SCANIA OF AMERICA, INC.
  3. Remove the upholstery strip from the front edge of the seat base.
  4. Remove screws securing the DSM.
  5. Undo and remove the clip holding the DSM. Remove the DSM.
    Fig 2: Illustration For Step 5 And 6
    G03617156Courtesy of SAAB-SCANIA OF AMERICA, INC.
    IMPORTANT: Take care when releasing the locking mechanism on the connector so as not to damage the connector. Pull the halves straight apart to avoid bending the pins. For further information regarding connectors, refer to CONNECTORS, HANDLING AND INSPECTION .
  6. Unplug the DSM.
scientia non olet · About LEMON Manuals