LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2004 >> 9-3 Linear, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 47 (General Information - 9-3) >> Technical Data >> Service programming >> 12 volt requirement for programming >> Notes

12 volt requirement for programming: Notes

WARNING: This page is about a different car, the 2005 Saab 9-3. However, it is still accessible from the selected car via links, so may be relevant.

The battery must be in good condition for successful SPS programming.

During SPS programming, all current consuming components and systems (lighting, ACC, audio system, seat heating, seat ventilation, radiator fans, etc.) must be switched off.

If SPS programming is interrupted, try again.

scientia non olet · About LEMON Manuals