LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2004 >> 9-3 Linear, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Basic Engine >> Adjustment-Replacement >> Rear crankshaft seal >> To remove

To remove

  1. Remove the gearbox, see or COMPLETE AUTOMATIC TRANSMISSION .
  2. Remove the pressure plate and clutch drive plate, see CLUTCH ASSEMBLY .
  3. Remove the driver plate or the Flywheel.
  4. Carefully pry out the seal using a screwdriver.
    Fig 1: Illustration For Step 4
    G03707952Courtesy of SAAB-SCANIA OF AMERICA, INC.
scientia non olet · About LEMON Manuals