LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2003 >> 9-3 Vector, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Convertible) >> Adjustment - Replacement >> Relay >> Fitting

Adjustment - Replacement: Relay: Fitting

WARNING: This page is about a different car, the 2001 Saab 9-3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fit the relay.
  2. Fit the relay holder.
  3. Connect the diagnostic tool and program the relay. See the menu "Programming " TECH 2 MENU STRUCTURE. .
    IMPORTANT: Never have more than one unprogrammed relay in the car. If more than one unprogrammed relay is fitted in the car both will receive the same address.
    If more than one relay has to be replaced, first fit and program one relay, then fit and program the next relay. This procedure is to prevent two relays from getting the same address.
  4. Then note the position of the relay.
  5. Refit the side upholstery.
  6. Erase any diagnostic trouble codes.
scientia non olet · About LEMON Manuals