LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2001 >> 9-5 Base, 4D Sedan, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Adjustment/Replacement >> Input shaft speed sensor >> To remove

To remove

Fig 1: Illustration For Steps 1-2
G03516125Courtesy of SAAB-SCANIA OF AMERICA, INC.
  1. Remove the battery cover, battery and battery tray.
  2. Disconnect the battery cable.
  3. Clean the area round the sensor. Remove the sensor's retaining bolt.
    Fig 2: Illustration For Steps 3, 6-7
    G03516126Courtesy of SAAB-SCANIA OF AMERICA, INC.
  4. Raise the car.
  5. Remove the left-hand front wheel.
  6. Gently work the sensor out of its location.
  7. Unplug the connector.
scientia non olet · About LEMON Manuals