LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2001 >> 9-3 Base, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Automatic Transmission) >> Adjustment-Replacement >> Torque Converter Seal >> To remove

To remove

WARNING: This page is about a different variant/trim than selected.
  1. Remove the gearbox, see TO REMOVE , under automatic gearbox assembly.
    Fig 1: Illustration For Step 3
    G03504659Courtesy of SAAB-SCANIA OF AMERICA, INC.
  2. Lift out the torque converter.
  3. Insert puller 87 92 384 inside the seal and use sliding hammer 83 90 270 to loosen the seal.
scientia non olet · About LEMON Manuals