LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2001 >> 9-3 Base, 2D Hatchback, Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Removal/Install/Overhaul >> Ignition System >> Ignition Discharge Module >> Removal - Rear (V6)

Removal - Rear (V6)

  1. Remove the engine cover.
  2. Unplug the connector to the pressure sensor on the intake manifold. See Fig 1 .
  3. Remove the ignition discharge module. See Fig 2 .
  4. Unplug the ignition discharge module connector.
Fig 1: Detaching Pressure Sensor from Intake Manifold (V6)
G00180887Courtesy of SAAB-SCANIA OF AMERICA, INC.
Fig 2: Removing Rear Ignition Discharge Module (V6)
G00180888Courtesy of SAAB-SCANIA OF AMERICA, INC.
scientia non olet · About LEMON Manuals