LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2000 >> 9-3 Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Gear Selector Mechanism (Automatic) >> Adjustment-Replacement >> SPORT button >> To fit

To fit

  1. Solder the leads to the SPORT button. Place some form of protection under it so that drops of solder do not fall onto the center console.
    Fig 1: Illustrating Steps 1-5
    G03464130Courtesy of SAAB-SCANIA OF AMERICA, INC.
  2. Press the SPORT button into place.
  3. Run the leads in a loop so that they will not be nipped.
  4. Fit the front part of the selector lever casing.
  5. Screw the selector lever together.
scientia non olet · About LEMON Manuals