LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 1996 >> 9000 CS, Standard >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Throttle Position (TP) Sensor >> Removal & Installation

Removal & Installation

If necessary, remove engine cover to access TP sensor. Unplug TP sensor connector. If necessary, disconnect large breather hose from throttle body. Remove screws and TP sensor. Note position of "O" ring on TP sensor. To install, reverse removal procedure. Ensure "O" ring is positioned correctly on TP sensor and is lubricated with petroleum jelly before installation. No adjustment is required after installation.

NOTE: Turbocharger removal and installation procedures for 9000 Series are not available from manufacturer.
scientia non olet · About LEMON Manuals