LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 1995 >> 9000 CS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (A/C-Heater System - Automatic) >> Testing >> A/C System Performance

A/C System Performance

WARNING: This page is about a different car, the 1996 Saab 900 and 1995 Saab 900. However, it is still accessible from the selected car via links, so may be relevant.
  1. Park vehicle out of direct sunlight. Connect manifold gauge set. Start engine and allow it to idle at 1500-2000 RPM. Ensure all panel vents are open. Select lowest temperature setting (LO is shown on display panel). Set A/C controls to recirculated air and panel (vent) mode.
  2. Insert thermometer in center vent. Operate system for 5 minutes to allow system to stabilize. Measure temperature. Temperature must be approximately 43-54°F (6-12°C) at center vent, with high side and low side pressures within specification. Difference between turn-on and turn-off should be 37-43°F (3-6°C). See SPECIFICATIONS  .