LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 1995 >> 9000 CS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (A/C-Heater System - Automatic) >> Operation >> A/C-Heater Control Panel >> Calibration Mode

Calibration Mode

WARNING: This page is about a different car, the 1996 Saab 900 and 1995 Saab 900. However, it is still accessible from the selected car via links, so may be relevant.

The A/C-heater control must be calibrated if the battery has been disconnected or discharged, a stepper motor replaced, or if the A/C-heater control panel has been replaced. The calibration and self-test are carried out by simultaneously pressing AUTO and OFF push button. The calibration and self-test takes less than 30 seconds.

All stored faults are cleared at the start and while calibration and self-test are in progress. The number of faults found will be shown on the A/C-heater control panel display.

scientia non olet · About LEMON Manuals