A/C System Performance
WARNING: This page is about a different car, the 1996 Saab 900 and 1995 Saab 900. However, it is still accessible from the selected car via links, so may be relevant.
- Park vehicle out of direct sunlight. Install A/C manifold gauge set. Start engine and allow it to idle at 1500-2000 RPM. Set A/C controls to recirculate air, panel (vent) mode, full cold, and A/C button on.
- Set blower fan on fourth speed, and close doors and windows. Insert thermometer in side vent. See Figure. Operate system for 5 minutes to allow system to stabilize.
- Measure temperature. Temperature must be approximately 43-54°F (6-12°C) at center vent, with high side and low side pressures within specification. Difference between turn-on and turn-off should be 37-43°F (3-6°C). See SPECIFICATIONS .