Electronic Control Module's Inputs
WARNING: This page is about a different car, the 1998 Saab 900, 1997 Saab 900, 1996 Saab 900, 1995 Saab 900, and 1994 Saab 900. However, it is still accessible from the selected car via links, so may be relevant.
- Speed signal from the ABS electronic control module (pin 5). See Fig 1 .
- RPM signal from the engine control system (pin 6).
- Temperature signal from the ICE electronic control module (pin 7).
- Fuel level from the fuel level transmitter (pin 11).
- Fuel consumption signal from the engine control system (pin 8).
- Charging pressure signal from the TRIONIC engine control system (pins 9 and 10).
The 6 lamps below also switch on the central warning lamp.
- ABS (ANTI LOCK) from the ABS system (pin 16).
- Oil pressure from the oil pressure transmitter (pin 17).
- Brakes from the brake fluid level transmitter (pin 18).
- SRS 2 (SRS 2 is the central warning lamp) from the air bag electronic control module (pin 2).
- Handbrake (pin 1) only if the speed exceeds 5 km/h.
- Charging lamp (pin 15).
Input signals (pins 3 and 4). See Fig 2 .
- Display lighting value from the Saab Information Display (SID) module.
- Value for luminosity of car's interior from the Saab Information Display (SID) module.
- Rheostat value from the Saab Information Display (SID) module.
- INFO DISPL from the Saab Information Display (SID) module.
- BLACK PANEL from the Saab Information Display (SID) module.
- Diagnosis from the diagnosis output.
- Input signals (pins 3 and 4). See Fig 2 .