LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 1995 >> 9000 CS, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Integrated Central Electronics (Ice)) >> Removal & Installation >> Ice Electronic Control Module

Ice Electronic Control Module

WARNING: This page is about a different car, the 1998 Saab 900, 1997 Saab 900, 1996 Saab 900, 1995 Saab 900, and 1994 Saab 900. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the cover for the fuse holder on the side of the fascia.
  2. Remove the knee shield over the pedal stand (6 screws).
  3. Lift out the air duct to make it easier to reach the relay holder behind.
  4. Remove the screw that holds the relay holder and turn down the holder. The ICE is located above the relay holder.
  5. To install, reverse removal procedures.
scientia non olet · About LEMON Manuals