LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 1995 >> 9000 CS, Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul - 2.3L Turbo >> Fuel System >> Oxygen Sensor >> Removal & Installation

Removal & Installation

  1. O2 sensor is mounted in the exhaust system, in or below exhaust manifold. Ensure sensor is free of contaminants. Avoid using cleaning solvents of any type.
  2. Disconnect wiring from sensor before removal. Sensor may be difficult to remove when engine temperature is less than 120°F (49°C). Always use anti-seize compound on threads before installation. Tighten to specification. See TORQUE SPECIFICATIONS  .
scientia non olet · About LEMON Manuals