LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 1994 >> 900 Base, Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Fuel Rail & Injectors >> Removal & Installation

Removal & Installation

  1. Relieve fuel pressure. See FUEL SYSTEM PRESSURE RELEASE  . Turn ignition off. Disconnect fuel supply line at banjo fitting. Disconnect fuel return line at pressure regulator. Disconnect vacuum hose at fuel pressure regulator.
  2. Unplug electrical connectors from injectors. Remove bolts from fuel rail, but leave injectors in place. Remove injector "O" ring seals from intake manifold.
  3. Remove fuel rail and injectors as an assembly. Remove injector clips. Remove injectors from fuel rail. To install injectors, lubricate injector "O" ring with petroleum jelly and reinstall. To complete installation, reverse removal procedure.
scientia non olet · About LEMON Manuals