LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 1989 >> 9000 CD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Engine Controls - System/Component Tests) >> Engine Sensors & Switches >> Oxygen (O2) Sensor

Oxygen (O2) Sensor

WARNING: This page is about a different car, the 1990 Saab 9000 and 1990 Saab 900. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect 2-wire O2 sensor connector. Measure resistance between 2 White wires. Resistance should be about 4 ohms.
  2. Set voltmeter to 2-volt DC scale. Connect voltmeter leads between Black sensor wire and ground. Start engine. Voltmeter reading should vary from 0.1-0.9 volt as sensor temperature increases and air/fuel mixture changes. Replace O2 sensor if resistance is not as specified or sensor reaction time is too slow.
scientia non olet · About LEMON Manuals