LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 1988 >> 9000 Base, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Turbocharger >> Removal & Installation >> SAAB >> Installation

Removal & Installation: SAAB: Installation

  1. Attach turbocharger to intake manifold, using new gasket. Attach oil return pipe to turbocharger, using new gasket.
  2. Fill oil feed channel with engine oil and attach oil pressure pipe, using new gasket. Install exhaust elbow and exhaust manifold. Install air intake and pressure connections to compressor. Reinstall battery.
  3. On Hall Effect ignition systems, disconnect wiring from control unit before cranking. Crank starter for approximately 30 seconds so turbocharger is primed with oil before engine operation.
scientia non olet · About LEMON Manuals