LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 1987 >> 9000 Base, Standard >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Overhaul - ZF 4HP 18 >> On-Vehicle Service >> Neutral Switch Replacement >> Installation

Neutral Switch Replacement: Installation

  1. While under vehicle, feed switch harness up into engine compartment. Install new "O" ring on neutral switch.
  2. Insert neutral switch into A/T case, install switch bracket and tighten bolt to 89 INCH lbs. (10 N.m).
  3. Install splash shield and lower vehicle. Connect neutral switch harness connector in engine compartment.
scientia non olet · About LEMON Manuals