LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 1987 >> 9000 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Disc) >> Overhaul >> Caliper Assembly >> Disassembly (Front)

Disassembly (Front)

WARNING: This page is about a different car, the 1990 Saab 9000 and 1989 Saab 9000. However, it is still accessible from the selected car via links, so may be relevant.

Clean caliper body. Install rag between piston head and pad retaining arms of caliper. Apply a small amount of compressed air to fluid inlet hole of caliper and remove piston. See Figure . Pull out dust cover. Remove piston seal from bore. Inspect all parts and replace any showing damage.

scientia non olet · About LEMON Manuals