LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 1986 >> 900 Base, 2D Convertible, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Fuel Injection System - Cis (8-Valve) >> Removal & Installation Caution >> Oxygen (O2) Sensor

Oxygen (O2) Sensor

  1. Disconnect wiring from sensor. Remove shield from sensor (if equipped). Remove sensor. Coat threads of new sensor with anti-seize compound. Take care not to get compound into slots on end of sensor.
  2. Install sensor and tighten to 25-30 ft. lbs. (35-41 N.m) on all other models. Refit shield and connect sensor wire.
scientia non olet · About LEMON Manuals