LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 1981 >> 900 S, 2D Hatchback, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> BOSCH Cis (Lambda) Fuel Injection >> Removal & Installation >> Mixture Control Unit

Mixture Control Unit

  1. Clean around all fuel line connections. Remove fuel lines and wipe up any spilled fuel. Disconnect electrical wiring and remove rubber boot to manifold. Remove Allen screws and lift off mixture control unit.
  2. To install, reverse removal procedure. Replace gaskets and seals and check for leaks after installation.
scientia non olet · About LEMON Manuals