All Models (Rear)
Install washer and lock nut. Tighten lock nut to 36 ft.lbs. (5 mkg) to seat bearings. Loosen lock nut completely, then tighten nut to 1.4 - 2.9 ft.lbs. (0.2 - 0.4 mkg) and lock nut in place by bending flange into slot of lock nut.
Install washer and lock nut. Tighten lock nut to 36 ft.lbs. (5 mkg) to seat bearings. Loosen lock nut completely, then tighten nut to 1.4 - 2.9 ft.lbs. (0.2 - 0.4 mkg) and lock nut in place by bending flange into slot of lock nut.