Engine Identification: Notes
GENERAL SPECIFICATIONS
| Year | Displ. | Carburetor | HP at RPM | Torque (Ft. Lbs. at RPM) | Compr. Ratio | Bore | Stroke | ||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Cu. ins. | cc | in. | mm | in. | mm | ||||||
| 1969-72 | |||||||||||
| 1700 | 104.2 | 1709 | 1x1-Bbl. | 80@5200 | 94@3000 | 9.0-1 | 3.288 | 83.5 | 3.071 | 78 | |
| 1700E | 104.2 | 1709 | Fuel Inj. | 87@5200 | 95@3000 | 9.0-1 | 3.288 | 83.5 | 3.071 | 78 | |
| 1850 | 113.1 | 1854 | 1x1-Bbl. | 86@5000 | 108@3000 | 9.0-1 | 3.425 | 87.0 | 3.071 | 78 | |
| 1850E | 113.1 | 1854 | Fuel Inj. | 95@5200 | 105@3200 | 9.0-1 | 3.425 | 87.0 | 3.071 | 78 | |
| 1973 | |||||||||||
| 1985 | 121 | 1985 | 1x1-Bbl. | 95@5200 | 115@3500 | 8.7-1 | 3.543 | 90 | 3.071 | 78 | |
| 1985E | 121 | 1985 | Fuel Inj. | 110@5500 | 123@3700 | 8.7-1 | 3.543 | 90 | 3.071 | 78 | |
On 1969-72 engines, engine number is stamped on a pad on cylinder block, just above exhaust manifold and below spark plugs, on left side of engine. On 1973 engines, engine number is stamped on a pad on cylinder block, just below distributor on right-hand side of engine. Engine is identified as shown in the following example: