LEMON Manuals: Even more car manuals for everyone
Home >> Renault >> 1982 >> 18i 4D Sedan, Automatic Trans >> Repair and Diagnosis >> Maintenance >> Procedures >> Wheel Alignment Specifications & Adjustments >> RENAULT >> Adjustment >> Riding Height >> Rear

Riding Height: Rear

  1. On all models, rear riding height is calculated by measuring from floor to center of wheel (H4). Then measure from floor to the punched out hole in rear side member (H5). See  Fig 1 .  On Fuego measure between floor and center of front bolt at side arms (H5).
    Fig 1: Measurement Location Points For Riding Height
    G09358452Courtesy of AMERICAN MOTORS/RENAULT CORP.
  2. The variation between right and left sides should not exceed 3/8" (9.5 mm). Adjust rear riding height in same manner as front riding height.
scientia non olet · About LEMON Manuals