LEMON Manuals: Even more car manuals for everyone
Home >> Renault >> 1977 >> R12 Base, Automatic Trans >> Repair and Diagnosis >> Steering >> Steering Column >> Steering Columns >> Overhaul >> Replacing Column Bushings >> Assembly

Replacing Column Bushings: Assembly

  1. Coat new bushings with suitable grease. Position lower split bushing on steering shaft and fit an old bushing below it (which has been turned down 0.079", 2 mm in diameter).
  2. Insert lower bushing by drawing steering shaft upward, then push it back slightly to recover old bushing. Using a suitable sleeve, insert upper bushing. Then reassemble snap ring, universal joint, and components removed from top of shaft.
scientia non olet · About LEMON Manuals