LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> 718 Spyder >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> 27 Starter, Power Supply, Cruise Control 4.0L -- 718 SPYDER >> WM, 278555 Replacing Distance Measuring Sensor Control Unit >> Automatically Coding Distance Measuring Sensor Control Unit >> Coding Control Unit For Distance Measuring Sensor Automatically

Coding Control Unit For Distance Measuring Sensor Automatically

  1. Select the Codings/adaptations  tab. Press F12  to continue.
  2. Automatic coding  must now be selected. Press F12  to continue.
  3. Wait for confirmation that coding was completed successfully.  Press F12  to continue.
  4. Exit the diagnostic application.
  5. Switch off ignition.
  6. Disconnect the battery charger from the vehicle.
  7. Carry out a test drive and read out the fault memory.
scientia non olet · About LEMON Manuals