Installing Central Control Unit For Assistance Systems
- Installation is performed in reverse order. Pay particular attention to the following:
Screw in fastening nut and tighten to > Tightening torque 7.9 Nm (6 ftlb.) .
Screw in fastening screws and tighten to > Tightening torque 4.5 Nm (3.25 ftlb.) .
Screw in fastening screws and tighten to > Tightening torque 7.9 (6 ftlb.) Nm .
Screw in fastening screws and tighten to > Tightening torque 7.9 (6 ftlb.) Nm .