DTC P080A-54: Clutch Position Not Learned - Missing calibration: Action
WARNING: This page is about a different car, the 2018 Land Rover Discovery and 2017 Land Rover Discovery. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- The rear differential control module performs a calibration routine every 1000 km.
- After installing a new rear differential control module, differential locking motor or electric differential, clear the DTCs and calibrate the system by performing routine - On Demand Self Test.
- Using the Jaguar Land Rover Approved Diagnostic Equipment, perform routine - On Demand Self Test. If the fault persists, install a new rear differential control module