DTC P0810-46: Clutch Position Control Error - Calibration/parameter memory failure: Action
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Land Rover Range Rover, 2017 Land Rover Range Rover, 2016 Land Rover Range Rover, 2015 Land Rover Range Rover, and 2014 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
- Start the engine and, using the Jaguar Land Rover approved diagnostic equipment, clear DTC and retest
- If the fault persists, install a new transfer case control module and configure as a new module. Refer to the Transfer Case Control Module Replacement Application instructions in the relevant Diagnosis and Testing Section
Refer to: TRANSFER CASE .
Using the Jaguar Land Rover approved diagnostic equipment, clear the DTCs and retest