DTC U2012-87: Car Configuration Parameter(s) - Missing message: Action
WARNING: This page is about a different car, the 2018 Land Rover Discovery and 2017 Land Rover Discovery. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
After updating the car configuration file, set the ignition to on and wait 30 seconds before clearing the DTCs.
- Using the Jaguar Land Rover Approved Diagnostic Equipment, check and update the car configuration file as necessary. Clear the DTCs and retest
- Using the Jaguar Land Rover Approved Diagnostic Equipment, clear the DTCs and retest. If the fault persists, re-configure the power steering control module with the latest level software
- Using the Jaguar Land Rover Approved Diagnostic Equipment, check the body control module for related DTCs and refer to the relevant DTC index