DTC B1214-13: Passenger Seatbelt Retractor Pretensioner Deployment Control - Circuit open: Action
WARNING: This page is about a different car, the 2018 Land Rover Discovery and 2017 Land Rover Discovery. However, it is still accessible from the selected car via links, so may be relevant.
- Visually inspect the passenger seatbelt retractor and pretensioner AK2 connector, the locking plunger should be flush with the housing. If not, push the locking plunger in. Clear the DTCs and retest
- Refer to the appropriate SYSTEM WIRING DIAGRAMS information and check the passenger seatbelt retractor and pretensioner circuit for open circuit, high resistance