DTC B1211-11: Driver Seatbelt Retractor Pretensioner Deployment Control - Circuit short to ground: Action
WARNING: This page is about a different car, the 2018 Land Rover Discovery and 2017 Land Rover Discovery. However, it is still accessible from the selected car via links, so may be relevant.
- Visually inspect the driver seatbelt retractor and pretensioner AK2 connector, the locking plunger should be flush with the housing. If not, push the locking plunger in. Clear the DTCs and retest
- Refer to the appropriate SYSTEM WIRING DIAGRAMS information and check the driver seatbelt retractor and pretensioner circuit for short circuit to ground