DTC B00C0-7B: Passenger Seat Occupant Classification Sensor "A" - Low fluid level: Action

WARNING: This page is about a different car, the 2018 Land Rover Discovery and 2017 Land Rover Discovery. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Do not attempt to install individual components from the service kit as they are calibrated to function as a single assembly.

Using the Jaguar Land Rover approved diagnostic equipment, perform routine - Learn Seat Occupant Classification Zero Position. Clear the DTCs and retest.
If fault persists, check the installation of the seat
Check the integrity of the occupant classification sensor bladder hose routing. Re-attach as necessary. Using the Jaguar Land Rover approved diagnostic equipment, clear the DTCs and retest
Using the Jaguar Land Rover approved diagnostic equipment, clear the DTCs and retest. If fault persists, install a new occupant classification sensor service kit as required (complete service kit consists of foam, occupant classification sensor bladder mat with attached smart digital pressure sensor)