DTC B0082-11: Passenger Seatbelt Load Limiter Deployment Control - Circuit short to ground: Action
WARNING: This page is about a different car, the 2018 Land Rover Discovery and 2017 Land Rover Discovery. However, it is still accessible from the selected car via links, so may be relevant.
- Visually inspect the passenger seatbelt retractor load limiter AK2 connector, the locking plunger should be flush with the housing. If not, push the locking plunger in. Clear the DTCs and retest
- Refer to the appropriate SYSTEM WIRING DIAGRAMS information and check the passenger seatbelt retractor load limiter circuit for short circuit to ground