DTC B0028-13: Right Side Air Bag Deployment Control - Circuit open: Action
WARNING: This page is about a different car, the 2018 Land Rover Discovery and 2017 Land Rover Discovery. However, it is still accessible from the selected car via links, so may be relevant.
- Visually inspect the right side airbag AK2 connector, the locking plunger should be flush with the housing. If not, push the locking plunger in. Clear the DTCs and retest. Refer to section 501-20B - SUPPLEMENTAL RESTRAINT SYSTEM and perform appropriate pinpoint test
- Refer to the appropriate SYSTEM WIRING DIAGRAMS information and check the right side airbag (seat) circuit for open circuit, high resistance