DTC P0919-94: Gear Shift Position Control Error - Unexpected operation: Action

WARNING: This page is about a different car, the 2018 Land Rover Discovery and 2017 Land Rover Discovery. However, it is still accessible from the selected car via links, so may be relevant.

Using Jaguar Land Rover approved diagnostic equipment, select the DTC associated Guided Diagnostics to facilitate a transfer case clutch calibration. The Guided Diagnostics will subsequently test the system and report a DTC if a fault persists
Using Jaguar Land Rover approved diagnostic equipment, clear the DTCs and cycle the ignition
Start the engine and, using Jaguar Land Rover approved diagnostic equipment, read the DTCs. If the fault persists, install a new transfer case control module and configure as a new module. Refer to the Transfer Case Control Module Replacement Application instructions in the relevant Diagnosis and Testing Section For additional information, refer to: DIAGNOSTICS (307-01 Automatic Transmission/Transaxle, Diagnosis and Testing). Using Jaguar Land Rover approved diagnostic equipment, clear the DTCs and retest