DTC B1083-13: Recirculation Damper Motor - Circuit open: Action
WARNING: This page is about a different car, the 2018 Land Rover Discovery and 2017 Land Rover Discovery. However, it is still accessible from the selected car via links, so may be relevant.
- Refer to the appropriate SYSTEM WIRING DIAGRAMS information and check the recirculation motor power and ground circuits for open circuit, high resistance. Repair the wiring harness as necessary
- Using the Jaguar Land Rover Approved Diagnostic Equipment, clear DTCs and perform routine - Run end stop detection on damper motors (0x9006). Check for DTCs and if the fault persists, install a new recirculation motor as necessary