DTC U2300-51: Central Configuration - Not programmed: Action

WARNING: This page is about a different car, the 2018 Land Rover Discovery and 2017 Land Rover Discovery. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: This DTC will be logged if the car configuration file in the vehicle has been changed

Using the Jaguar Land Rover approved diagnostic equipment, perform routine - InControl Touch Pro variant configuration
Clear the DTCs, cycle ignition twice, wait for 3 minutes and retest
If the fault persists, do not replace the infotainment master controller/slave controller (where fitted). Contact the Jaguar Land Rover service desk for further assistance