DTC B1009-62: Ignition Authorisation - Signal compare failure: Action
WARNING: This page is about a different car, the 2018 Land Rover Discovery and 2017 Land Rover Discovery. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
To validate the repair firstly check the engine cranking, then use the Jaguar Land Rover approved diagnostic equipment to check the DTCs within the body control module. If the repair is successful this DTC will no longer be logged
- Using the Jaguar Land Rover approved diagnostic equipment run the "start authorisation" application to perform reconfiguration of the module