DTC U2300-56: Central Configuration - Invalid/incomplete configuration: Action
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Land Rover Range Rover, 2017 Land Rover Range Rover, 2016 Land Rover Range Rover, 2015 Land Rover Range Rover, and 2014 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
- Using JLR approved diagnostic equipment, check and update the car configuration file as necessary
- After updating the car configuration file, set the ignition to on and wait 40 seconds before clearing the DTCs and retesting
- If the fault persists, using JLR approved diagnostic equipment, confirm correct dynamic response control module calibration data and software versions are installed and update as required. Clear the DTCs and retest