DTC C1119-91: Hydraulic Pressure - Parametric: Action
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Land Rover Range Rover, 2017 Land Rover Range Rover, 2016 Land Rover Range Rover, 2015 Land Rover Range Rover, and 2014 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
- Check integrity of hydraulic system, clean the system and replace the hydraulic fluid. Check and replace the return pipe as necessary. Clear the DTCs and retest
- If the fault persists, check the suction hose for blockage or kinking and rectify or replace as required. Clear the DTCs and retest
- If the fault persists, install a new pressure transducer. Clear the DTCs and retest
- If the fault persists, install a new valve block. Clear the DTCs and retest